High-Power Rotary Tillage Machine, Multi-Function Tillage Machine, Small Micro-Tillage Machine For Weeding And Ditching - Henan Yinhao Machinery
Home > News > Article

High-Power Rotary Tillage Machine, Multi-Function Tillage Machine, Small Micro-Tillage Machine For Weeding And Ditching

Date:2024-12-30 From:Henan Yinhao Machinery Views:250
Spread here

High-Power Rotary Tillage Machine, Multi-Function Tillage Machine, Small Micro-Tillage Machine For Weeding And Ditching

The micro-cultivator is powered by a small diesel engine or gasoline engine and has the characteristics of light weight, small volume and simple structure. The micro-cultivator is widely used in plain, mountainous, hilly dry land, paddy fields, orchards and so on. Equipped with the corresponding machinery can be pumped, power generation, spraying, spraying and other operations, can also be pulled trailer for short distance transport, micro-cultivator can be freely exercised in the field, easy for users to use and store, eliminating the large agricultural machinery can not enter the mountain field trouble, is the best choice for the majority of farmers consumers to replace cattle farming.

Note: Please be sure to add oil before operation and use, the engine is not allowed to add oil due to logistics reasons, so the machine must add oil to the engine and filter before use

1, The engine after the initial start for 5 minutes of heat engine operation. Keep low speed load operation before the engine is not hot, do not run at high speed full load or low speed no load operation;

2. Avoid over-load operation. The engine can not run at full load in the running-in period, and can be run in at the speed of 3000 RPM 1 minute and the load is about 50%.

3. Change the oil on time. After the engine runs for 20 hours, the heat engine replaces the oil, otherwise the residual oil in the body cannot be drained. After 20 hours of oil change, after every 100 hours to change the oil;

4, If the fuel is mixed with water and dirt, it will lead to abnormal or unable to operate the diesel engine. If there is water and dirt in the fuel, the fuel should be stored in a clean container for precipitation for more than 2 hours, and then the oil at the bottom of the fuel container above can not be used with a hose or pump;

5, Oil selection method to choose the right oil is very important. If the oil grade used is not suitable, it will cause the bonding of the piston ring and burn the piston ring; Rapid wear of cylinder liner; The rapid wear of bearings and other moving parts shortens the service life of diesel engines;

6, Keep the air filter clean. If the engine power is insufficient and the smoke color deteriorates, the air filter element should be replaced or the core cleaned. The filter element is cleaned for 100 hours for the first time, and the filter element is replaced after 500 hours to 1000 hours for the second time.

Microtiller (8)Microtiller (37)Microtiller (50)Microtiller (14)Microtiller (26)