Wood Pellet Stove Indoor Heating-Equipment Wood Pellet Heater Fireplace Stoves
Introduction:
1. Intelligent biomass pellet heating furnace is a new type of heating equipment, which generates heat by burning wood pellets through coal.
2. The scope of application: office, villas, shops, restaurants, hotels, entertainment, bathing, institutions, schools, factories, etc.
3. low carbon environmental protection, smokeless and dust-free, zero emissions, economic and practical, the true fire landscape in the furnace, beautiful and generous.
4. Low operating costs, 20% saving than coal, 40% saving than gas heating, 50% saving than liquefied gas heating, and 70% saving than electric heating.
5. The product has large heat, fast heating, does not consume moisture in the air, and the wind is warm and dry.
6. Fully sealed combustion chamber, negative pressure internal combustion, full combustion, safe and reliable, will not appear poisoning.
7. Automatic unattended, automatic feeding, automatic ignition, temperature, air volume adjustable, timing switch machine.
8. Simple installation, easy maintenance, clean the dust box once every 5-7 days.
Question and Answer:
1. Do pellet heating furnaces need to be connected to exhaust pipes? Got a cigarette?
Need external exhaust pipe, diameter 8 cm, can be purchased by the market, you can also contact customer service to buy.
When the pellet furnace is automatically ignited, there is smoke discharge for 2-5 seconds, and the smoke is not visible in normal work due to the full combustion.
2. Pellet furnace need professional installation? Are there any requirements for installation height and length?
The installation of the pellet furnace is very simple, plug in the exhaust pipe and power on.
The outlet of the exhaust pipe must face south instead of north. The installation height and length are not affected.
3. Does the pellet furnace use much electricity?
Pellet furnace is a very economical new equipment, the power is 300W when performing the ignition procedure, the normal working power is 60W.
4. Particle furnace can be connected to the floor heating or radiator?
Pellet heating furnace is divided into two kinds of wind and water heating, and the internal structure is not the same.
Air heating: Through the furnace body flow fan directly exchange the indoor air with the heating system to achieve the heating effect.
Water heating: the heating effect is achieved through the connected circulation of the water tank inside the furnace body and the radiator or the floor heating
5. How about the use cost of pellet heating furnace?
This product uses 6mm diameter biomass particles, the best choice of pure pine wood shavings production.
If you buy 8mm diameter particles, please buy a small number of trial, no problem before you can buy in large quantities.
Parameters:
| Model | Types | Weight(KG) | Size(mm) | Hopper capacity (kg) | Burning time (h) | Combustion consumption (kg/h) | Heat efficiency | Power | Heat square meter(M2) | Automatic ignition time |
| YH-01 | Wind warm | 83 | 480*450*935 | 18 | 8-15 | 0.5-1.2 | >=94% | 50w/220V 50hz. | 40-70 | 2-5mins |
| YH-02 | Wind warm | 105 | 520*470*970 | 18 | 8-15 | 0.5-1.2 | >=96% | 60w/220V 50hz | 80-100 | 2-5mins |
| YH-03 | Wind warm | 120 | 485*482*1010 | 26 | 8-15 | 0.5-1.6 | >=96% | 60w/220V 50hz | 80-120 | 2-5mins |
| YH-05 | Wind warm | 83 | 465*465*770 | 10 | 8-15 | 0.5-1.2 | >=89% | 60w/220V 50hz | 40-60 | 2-5mins |
| YH-06 | Wind warm | 110 | 840*280*960 | 17 | 8-15 | 0.5-1.2 | >=89% | 50w/220V 50hz | 50-80 | 2-5mins |
| YH-08 | Wind warm | 96 | 612*383*970 | 18 | 8-15 | 0.5-1.6 | >=96% | 60w/220V 50hz | 30-60 | 2-5mins |
| YH-11 | Wind warm | 125 | 510*560*990 | 20 | 8-15 | 0.5-1.6 | >=98% | 60w/220V 50hz | 100-140 | 2-5mins |
| YHS-01 | Water warm | 120 | 483*983*508 | 20 | 8-15 | 0.5-1.6 | >=96% | 50w/220V 50hz | 80-160 | 2-5mins |
| YH-120 | Water warm | 120 | 541*748*1092 | 20 | 6-10 | 1.2-2.6 | >=85% | 60w/220V 50hz | 60-120 | |
| YH-160 | Water warm | 150 | 600*600*1200 | 28 | 8-15 | 1.2-3.5 | >=92% | 60w/220V 50hz | 100-160 | |
| YH-300 | Water warm | 155 | 600*600*1200 | 28 | 8-15 | 2.2-5.5 | >=92% | 50w/220V 50hz | 200-260 |
